The Phiston MediaVise Rackmount V-Spike SSD Destroyer (MVR-V- SSD) is a rack mountable that combines physical Destruction of solid-state storage Devices (SSD) with Phiston `s V-Spike Technology that Disables SSD Electronic Components.

ModelMVR-V-SSD
Machine Weight (Excluding packaging and crating)180 lbs. – 110 volt model
196 lbs. – 220 volt model
Machine Dimensions15.8 H x 28.4 L x 18.8 W
Occupies 9 standard rack unit spaces
Shipping Weight245 lbs. – 110 volt model
261 lbs. – 220 volt model
Shipping Dimensions25” x 39” x 36 ” (H x L x W)
Power Requirements (voltage / frequency / current)220 Volts A.C. ±10%, 50/60 Hz, 7.5 Amps
110 Volts A.C. ±10%, 50/60 Hz, 15 Amps
Factory Configured for any international power supplies
Maximum Media Size that can be put in the crusherUp to 5.75” x 1.25” x 4” (H x L x W). Depending on their sizes, up to 2 smaller SSD devices or 2 laptop HDDs at a time may be crushed provided they fit easily in the crusher (do NOT force in).
Full Crushing Cycle Time (From loading device until safe ejection and containment of debris)Less than 30 seconds from loading until crushed media are safely and automatically ejected into debris bin. No attachments or adapters to install or change. No need to touch or manually remove sharp debris, or to clean the crushing chamber after each use.
Media AcceptedDedicated SSD destroyer (no adapters required), cell phones, circuit boards, memory chips. The MVR-SSD will also crush computer HDDs making them inoperable, however, this application is recommended only for emergency destruction of HDDs, and only in limited numbers as the hard metal casings of HDDs will quickly dull the sharp pyramidal teeth of the MVC-SSD.
Debris CollectionDebris is ejected directly into the included collection drawer that holds up to 75 destroyed SSDs
Maintenance/Longevity50,000 Cycles MTBF. No blades to be replaced or sharpened
Technical SupportOn-call technical support service department; nationwide and international technical support team that can be deployed if and when repairs or maintenance needed.

Leave a Reply

Your email address will not be published. Required fields are marked *